PnwRcMadness Belt Drive Mod

This product or service is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services. Traxxas® and [insert the product trademark here (e.g., X-MAXX®)]® are trademarks or registered trademarks of Traxxas, L.P.”
This bolt kit is for the two front lower (input) gear cover bolts. Take out the stock ones and install these from the bottom of the chassis screwing up into the lower gear cover.  The kit will come with (2) aluminum shims, (2) m4 nylon lock nuts and (2) screws. The longer one goes towards the middle of the chassis.  (You will also have to modify the xrt chassis so the bolts work correctly)They will need to be pressed in with some sort of tool clamp press hammer etc. they are snug but will fit perfect.  
This kit is recommended for gears or belt drive. The belt drive uses more force and wants to pull the lower gear cover up off the lower bulkhead. Eventually stripping the chassis holes out. With this kit you will no longer have that issue. 
I run all belt drives so o can't really speak on the gear setups